Hobby Lobby Crash Sale (only on Wed)
#152

3 CRASH Items On Sale!
Ikarus Lexors Micro & Mini Servos
- These servos are great for many applications - 3D planes, Shock Flyers, micro and mini helicopters, and other airplanes.
- Buy as many as you need - They are all discounted! Click below for details and specs.
#153

I see Hobby Lobby also has a "7x5" sale going on: http://www.hobby-lobby.com/7x5-wk1.htm
Polyquest lipos on sale this week. Still kinda pricey compared to eBay or Hobbycity. Good batteries though.
Polyquest lipos on sale this week. Still kinda pricey compared to eBay or Hobbycity. Good batteries though.
#154

3 CRASH Items On Sale!
Ikarus Lexors Micro & Mini Servos
- These servos are great for many applications - 3D planes, Shock Flyers, micro and mini helicopters, and other airplanes.
- Buy as many as you need - They are all discounted! Click below for details and specs.
#156

wow.......I'm not sure I would spend that much on a servo. I guess I will sit this one out -
<TABLE cellSpacing=0 cellPadding=2 width=762 align=center border=0><TBODY><TR><TD vAlign=top width="100%"><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD bgColor=#d7d7d7>
<TABLE cellSpacing=0 cellPadding=2 width=762 align=center border=0><TBODY><TR><TD vAlign=top width="100%"><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD bgColor=#d7d7d7>
Ikarus Lexors Micro & Mini Servos
</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=343>
</TD><TD width=385>
</TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>
Lexors Micro 100 Servo - .2 oz. (5.8 grams), .8" x .4" x .9". Performance servo for small 3D planes, Shock Flyers, micro and mini helicopters, and other small airplanes.
</TD></TR></TBODY></TABLE>IK171100 Ikarus Lexors Micro 100 Servo ..... $19.90
CRASH SALE! ..... $ 14.90
<INPUT id=c__IK171100 size=2 value=1 name=c__IK171100> <INPUT type=submit value="Add IK171100 to Cart"> AVAILABLE NOW
</FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD vAlign=top><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD width="100%">CRASH SALE! ..... $ 14.90
<INPUT id=c__IK171100 size=2 value=1 name=c__IK171100> <INPUT type=submit value="Add IK171100 to Cart"> AVAILABLE NOW
<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=343>
</TD><TD width=385>
</TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>
Lexors Micro 202 Servo - .4 oz. (10 grams), 1" x .5" x 1.1". Universal servo for small 3D planes, Shock Flyers, micro and mini helicopters, and other small airplanes.
</TD></TR></TBODY></TABLE>IK171202 Ikarus Lexors Micro 202 Servo ..... $19.90
CRASH SALE! ..... $ 12.90
<INPUT id=c__IK171202 size=2 value=1 name=c__IK171202> <INPUT type=submit value="Add IK171202 to Cart"> AVAILABLE NOW
</FORM></TD></TR></TBODY></TABLE></TD></TR><TR><TD><HR width="100%" color=#0000ff></TD></TR><TR><TD vAlign=top><TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD>CRASH SALE! ..... $ 12.90
<INPUT id=c__IK171202 size=2 value=1 name=c__IK171202> <INPUT type=submit value="Add IK171202 to Cart"> AVAILABLE NOW
<TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=343>
</TD><TD width=385>
</TD></TR><TR><TD><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>
Lexors Mini 230 Servo - .6 oz. (16.6 grams), 1.2" x .5" x 1.2". Universal servo for ECO 8 and other larger electric helicopters.
</TD></TR></TBODY></TABLE>IK171230 Ikarus Lexors Mini 230 Servo ..... $24.90
CRASH SALE! ..... $ 12.90
<INPUT id=c__IK171230 size=2 value=1 name=c__IK171230> <INPUT type=submit value="Add IK171230 to Cart"> AVAILABLE NOW
</FORM></TD></TR></TBODY></TABLE></TD></TR></TBODY></TABLE>
CRASH SALE! ..... $ 12.90
<INPUT id=c__IK171230 size=2 value=1 name=c__IK171230> <INPUT type=submit value="Add IK171230 to Cart"> AVAILABLE NOW
#161


#162

C'mon tom.....
Even though they did something good for breast cancer, its prob hard for some guys to own a pink plane. If your secure enough in your manhood it should be no problem.....
or you can just paint it
Even though they did something good for breast cancer, its prob hard for some guys to own a pink plane. If your secure enough in your manhood it should be no problem.....
or you can just paint it

#163


#164

Has anyone who bought the Ikarus Pitts S1-S last month finished building it yet? Mine is almost ready to fly! Just have to get the prop, ESC and battery attached and it will be good to go.
Not sure what my AUW is, but I think its on the heavy side. I didn't use the included brushed motor, so hopefully the extra power of the outrunner will make up for it.
Not sure what my AUW is, but I think its on the heavy side. I didn't use the included brushed motor, so hopefully the extra power of the outrunner will make up for it.
#165

<TABLE cellSpacing=4 cellPadding=4 width="100%" align=center border=0><TBODY><TR><TD bgColor=#d7d7d7>
1-7/8 oz. weight, 1-1/8" diameter, 1-1/16" case length, 3.17mm (1/8") shaft. INCLUDES Radial Mounting System and aluminum prop nut. For 2-3 lipoly or 5-10 NiCad/NiMH cells. For 12-35 amp controllers and propellers from 5x5 to 12x8!</TD><TD>
1-7/8 x 7/8 x 3/8", 19 grams (5/8 oz.). 20 Amps continuous, for 5 to 10 NiCd or NiMH, 2 to 3 Lithium cells. BEC can run 4 servos on 6 cell battery, 2 servos on 10 cells. Order connector set MJ21011.</TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><HR width="100%" color=#d7d7d7></TD></TR><TR><TD align=middle><TABLE borderColor=#d7d7d7 cellSpacing=0 cellPadding=2 width=460 align=center border=1><TBODY><TR bgColor=#d7d7d7><TD colSpan=2>
Twin tailed pusher plane with Jet-like performance
</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width=476></TD><TD width=252>
</TD></TR><TR><TD><TABLE cellSpacing=2 cellPadding=2 width="100%" border=0><TBODY><TR><TD width="50%">36" wingspan, 33" long, 27 oz. flying weight. Beautifully and totally built from laser cut balsa and plywood. Covered with heat shrink covering and decorated with decals. Airplane assembles in about 4 hours. Torque rods for the ailerons are installed and the hinges in the control surfaces are ready for you to glue in place. Laser cut motor mount is included. Take-offs are smooth and control response is quick. Landings are easy, just hold the nose up and bleed off the speed until you touch down. Flight times are around 10 minutes. For 4 channels: Ailerons, Elevator, Nose Wheel steering and Throttle.
</TD></TR></TBODY></TABLE>AM231220 Atlas Outrunner Motor
</TD><TD width="50%">ABC20 Atlas Black Brushless Controller
</TD></TR><TR><TD>
1-7/8 oz. weight, 1-1/8" diameter, 1-1/16" case length, 3.17mm (1/8") shaft. INCLUDES Radial Mounting System and aluminum prop nut. For 2-3 lipoly or 5-10 NiCad/NiMH cells. For 12-35 amp controllers and propellers from 5x5 to 12x8!

1-7/8 x 7/8 x 3/8", 19 grams (5/8 oz.). 20 Amps continuous, for 5 to 10 NiCd or NiMH, 2 to 3 Lithium cells. BEC can run 4 servos on 6 cell battery, 2 servos on 10 cells. Order connector set MJ21011.
Online Video Clips -- See V-Diamond FLY!
</TD></TR><TR bgColor=#eee9bf><TD bgColor=#d7d7d7 colSpan=2>Video clips are done in either the RealPlayer or the Windows Media format. Click either link to download the free software.</TD></TR><TR><TD width="50%"></TD><TD width="50%"></TD></TR></TBODY></TABLE></TD></TR><TR><TD align=middle><HR width="100%" color=#d7d7d7></TD></TR><TR><TD align=middle><FORM action=/cgi-bin/basket.pl/hobbylobby?basket.html method=post>CYM248CR V-Diamond ARF COMBO with Brushless Motor & Controller ..... $163.50
CRASH SALE! ..... $ 109.00 - You SAVE $54.50!
<INPUT id=c_CYM248CR size=2 value=1 name=c_CYM248CR> <INPUT type=submit value="Add CYM248CR to Cart"> AVAILABLE NOW
</FORM></TD></TR></TBODY></TABLE>
CRASH SALE! ..... $ 109.00 - You SAVE $54.50!
<INPUT id=c_CYM248CR size=2 value=1 name=c_CYM248CR> <INPUT type=submit value="Add CYM248CR to Cart"> AVAILABLE NOW
#166

What the....... (pics not working...)
<TABLE cellSpacing=0 cellPadding=5 width="100%"><TBODY><TR><TD vAlign=top width="100%">
</TD></TR><TR><TD vAlign=top>
</TD></TR><TR><TD vAlign=top>
IK2023016 Ikarus 3x3" Shock Flyer Propeller ..... $1.90
CRASH SALE! ..... $ 1.00
</TD></TR><TR><TD vAlign=top>
<TABLE cellSpacing=0 cellPadding=5 width="100%"><TBODY><TR><TD vAlign=top width="100%">
3 CRASH Items This Week!
Ikarus Variable Pitch Prop with Brushless Motor and More...
</TD></TR><TR><TD vAlign=top>

<HR width="100%">
Ikarus PPS-4D Set with Brushless Motor S2 - Set includes Ikarus #2023023 PPS-4D Variable Pitch Propeller with Ikarus #2023019 Hollow Shaft S2 Brushless Outrunner Motor. Suitable for all Shock Flyer size 3D foam airplanes.
IK2023024 Ikarus Variable Pitch Prop Set with Brushless Motor ..... $129.00
CRASH SALE! ..... $ 49.00
CRASH SALE! ..... $ 49.00
</TD></TR><TR><TD vAlign=top>

<HR width="100%">
Ikarus Shock Flyer Propeller - 3" x 3" propeller for small Shock Flyer-type aircraft.
Ikarus Shock Flyer Propeller - 3" x 3" propeller for small Shock Flyer-type aircraft.
IK2023016 Ikarus 3x3" Shock Flyer Propeller ..... $1.90
CRASH SALE! ..... $ 1.00
</TD></TR><TR><TD vAlign=top>

<HR width="100%">
IK2021001 Ikarus "3D Power Set" Brushed Drive System ..... $7.75
CRASH SALE! ..... $ 5.00
</TD></TR></TBODY></TABLE>
Ikarus 3D Power Set - Brushed motor and gearbox with CAD/CAM designed 3D propeller. Use on any 3D Shock Flyer or other small foam 3D planes.
IK2021001 Ikarus "3D Power Set" Brushed Drive System ..... $7.75
CRASH SALE! ..... $ 5.00
</TD></TR></TBODY></TABLE>
#168

Here ya guys go, some specs for the Luxor 202!
Also, a lower price...of course...
http://www.flyingmodelsupply.com/pro...5&productId=16
http://www.rc-info.de/elektronik/ser...micro-202.html
Personally...I don't think it's worth it, stick w/ Futaba micros.
Also, a lower price...of course...
http://www.flyingmodelsupply.com/pro...5&productId=16
http://www.rc-info.de/elektronik/ser...micro-202.html
Personally...I don't think it's worth it, stick w/ Futaba micros.
#169

Did anybody buy the $15 helicopter? I couldn't find any useful info on it but I looked at the little video and thought it would be worth the three fins.
Now, I realize you get what you pay for but I bought a tiny rtf heli at Toledo for $15 and I've had a ball with it. So we'll see.
I noticed it sold out pretty quick so someone knows something. Any Wattflyers bite?
Now, I realize you get what you pay for but I bought a tiny rtf heli at Toledo for $15 and I've had a ball with it. So we'll see.
I noticed it sold out pretty quick so someone knows something. Any Wattflyers bite?
#170

I bought the $15 heli. It will be my first Heli. What they don't tell you though, is that you need a specific made-by-Ikarus-only "Piccoboard"........ Which is $79 and " AVAILABLE SOON"
http://www.hobby-lobby.com/piccolo-parts.htm
http://www.hobby-lobby.com/piccolo-parts.htm
#172

I bought the $15 heli. It will be my first Heli. What they don't tell you though, is that you need a specific made-by-Ikarus-only "Piccoboard"........ Which is $79 and " AVAILABLE SOON"
http://www.hobby-lobby.com/piccolo-parts.htm
http://www.hobby-lobby.com/piccolo-parts.htm
Get this board instead.
http://www.allerc.com/product_info.p...oducts_id=1814
Much better deal, and does the same thing.
#173

Get this board instead.
http://www.allerc.com/product_info.p...oducts_id=1814
Much better deal, and does the same thing.
http://www.allerc.com/product_info.p...oducts_id=1814
Much better deal, and does the same thing.
#174


#175

Well that piccoboard business is certainly a drag. I guess I just figured I'd only have to supply the usual stuff,e.g. servos, rx, esc, and battery. And I already have that stuff laying around. But I can see that the tail rotor uses a separate motor and I guess you need the "board" to plug both motors into the esc.
Like vax, this is my first heli and I can see I've got a lot of reading up to do.
Rush, thanks for steering us to a cheaper board. Any issues adapting the allerc board? If I use a brushless motor, will I also have to use brushless in the tail? I don't think they make one that small.
Like vax, this is my first heli and I can see I've got a lot of reading up to do.
Rush, thanks for steering us to a cheaper board. Any issues adapting the allerc board? If I use a brushless motor, will I also have to use brushless in the tail? I don't think they make one that small.