HK450GT CCPM Basic Setup
10-22-2015, 05:26 AM
#1
New Member
Thread Starter
Join Date: Aug 2005
Posts: 1
HK450GT CCPM Basic Setup
I think I know the answer to this, but I want to know what you guys think. I have a HK450GT controlled by a Turning 9XR PRO, Orange module/RX and a GA-250 Gyro. Anything wrong here?
I pretty much have the radio programming out. I have been using a similar OS on other models. No issues here.
The gyro is differnt, I have never set one up. Also, I curious about the pitch settings. The Align manual says +/- 11 degrees. I have also been told for starters, going to a +7/-2 degrees to start.
On the gyro, I have it working in the correct direction, but how much bias should it have?
I can fly a fixed pitch indoor helI pretty well. I'm using the Phoenix 5 Sim and hover the Align 450 reasonably well aND fly around using simple flat rudder turns.. Unfortunately I will be trying to fly this on my own. Any comments or suggestions would be appreaciated.
I pretty much have the radio programming out. I have been using a similar OS on other models. No issues here.
The gyro is differnt, I have never set one up. Also, I curious about the pitch settings. The Align manual says +/- 11 degrees. I have also been told for starters, going to a +7/-2 degrees to start.
On the gyro, I have it working in the correct direction, but how much bias should it have?
I can fly a fixed pitch indoor helI pretty well. I'm using the Phoenix 5 Sim and hover the Align 450 reasonably well aND fly around using simple flat rudder turns.. Unfortunately I will be trying to fly this on my own. Any comments or suggestions would be appreaciated.
