Turnigy C2830 for Slow Stick
11-07-2008, 01:25 AM
New Member
Thread Starter
Join Date: Mar 2006
Posts: 5
Turnigy C2830 for Slow Stick
Is there a stick mount available for the c2830? What is the best way to mount this motor on a slow stick?
11-07-2008, 01:54 AM
Keep the sunny side up
Join Date: Aug 2008
Location: victorville california
Posts: 1,879
I dont know if you can see this but i mounted mine to a piece of plywood & then mounted it to the stick mount
Attached Thumbnails
11-07-2008, 02:03 AM
New Member
Thread Starter
Join Date: Mar 2006
Posts: 5
Yep I can see how you have it mounted, thanks. I had ordered 2 of these motors thinking that the towerpro stick mount would work but to my surprise is to small for the motor barrel, live and learn.
11-07-2008, 04:29 AM
11-07-2008, 08:23 PM
Keep the sunny side up
Join Date: Aug 2008
Location: victorville california
Posts: 1,879
I knew I shouldve asked Chellie if there was a mount for one of these,Thanks Chellie
-RT
11-07-2008, 10:31 PM
New Member
Thread Starter
Join Date: Mar 2006
Posts: 5
Thanks for all the info on the mounts. This is the motor I was talking about, shouldnt be a problem to make one after seeing some options.
Attached Thumbnails
11-07-2008, 10:57 PM
RC Lawndart Master
Join Date: Apr 2008
Location: Missoula, MT
Posts: 71
I have the same motor. I took the guts(motor, gear and shaft) off of a GWS 300 motor and bolted the Turnigy to the front of the empty 300 mount. Workd fine.
11-08-2008, 04:48 AM
Super Contributor
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,323
Quote:
Originally Posted by
Rolling Thunder
I knew I shouldve asked Chellie if there was a mount for one of these,Thanks Chellie
-RT
LOL
Your very Welcome,
Anytime, Take care,Chellie
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
11-07-2008, 04:29 AM
you can even, epoxy this mount to a piece of plywood, then screw your motor to the plywood, Take care, Chellie
Your very Welcome, 
