Power Systems Talk about motors, ESC speed controllers, gear drives, propellers, power system simulators and all power system related topics

New Member

Old 06-29-2012, 06:05 PM
  #1  
Bruce Harding
New Member
Thread Starter
 
Join Date: Jun 2012
Posts: 5
Default New Member

Guys,

I am a new Member to WattFlyer. I have been building and flying giant scale warbirds for years. I bought an ESM PC9 and decided to install an AXI 534514HD for power. I am controlling it with a Turnigy Superbrain 100A esc and two Gens 5300 18.5v battery packs. The Turnigy did not come with any instructions. I bought the programmer also. It has some instructions but not much. I have flown the smaller electrics but this programmer has alot more programming ability.

One thing that is messing me up is the programmer is asking for a parameter of either 8kw, 10kw, 12kw, or 14kw. I am at a loss with what it is asking.

Also I have the battery leads directly plugged into the batteries with no switch. I have to take the airplane apart everytime I want shut down the plane and to charge the batteries. What kind of switch would work to turn off the power to the esc?

Many Thanks
Bruce
Bruce Harding is offline  
Old 06-30-2012, 12:20 AM
  #2  
hayofstacks
Super Contributor
 
hayofstacks's Avatar
 
Join Date: Jan 2012
Location: Utah
Posts: 1,780
Default

Can't help as I've only delt with parkflyers...

But welcome to the forum!
hayofstacks is offline  
Old 06-30-2012, 04:59 PM
  #3  
Walt Thyng
Walt
 
Walt Thyng's Avatar
 
Join Date: Aug 2005
Location: St. Charles, Illinois
Posts: 381
Default newbie questions

the 8 - 14 numbers refer to the pulse width (PW) at which the ESC is working. Most use either the factory default setting or 8. Going to a higher number gives more precise ESC response, but uses more power. Typically on competition pilots play with this number.

If you are using Lipos you should not charge them in the plane as a mistake could destroy it.

For saftey's sake most use an "arming plug." These go between the battery and the ESC, usually on the red lead. There are commercially available plugs or you can make your own using ths same style connector as on your batts and ESC. Basically an arming plug is a jumper that completes the circuit.

Hope this helps.
Walt
Walt Thyng is offline  
Old 06-30-2012, 09:36 PM
  #4  
pd1
Still Learning
 
pd1's Avatar
 
Join Date: Sep 2006
Location: North of Boston
Posts: 4,098
Default

Here's a source for the arming plug:
\http://www.maxxprod.com/mpi/mpi-21.h...racle%20Switch

6972 Arming Switch, with Ultra Dean Plugs & AWG12 wires
6982 Arming Switch, with Power Poles & AWG12 wires, 45A contacts
pd1 is offline  
Old 07-01-2012, 01:14 AM
  #5  
Don Sims
Administrator
 
Don Sims's Avatar
 
Join Date: Sep 2005
Location: Middle Tennessee
Posts: 14,009
Default

Welcome to the site!
Don Sims is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RCJeff
General Electric Discussions
10
07-21-2017 12:58 AM
Don Sims
General Electric Discussions
3
03-30-2012 04:58 AM
Bo90
General Electric Discussions
10
10-28-2011 09:49 AM
AndrewQLD
Beginners
22
01-10-2011 01:33 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On


Quick Reply: New Member


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service - Do Not Sell My Personal Information -

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.11036 seconds with 15 queries