Hubsan H502S Desire "CIRCLE FLY" ???
#1
New Member
Thread Starter
Join Date: Mar 2012
Posts: 17

I tried recording some video with a Hubsan FPV X4 H502S Desire for the first time this evening and after pressing the video button got a message on the controller screen that said: CIRCLE FLY. I had put a 2GB mini SD card in the card slot that in the past had worked with a Syma X5C and it seemed to fit okay, but there was no video or photo on it when I checked later. Can anyone explain what happened?
Thank you for any help trying to learn this stuff!
David
Thank you for any help trying to learn this stuff!
David
#2

There have been several reported video failures (among quite a few other issues) on the 502s reported at web sites like RCG, drone-maniac, fpv hub, droneflyers and a few more............The "circle fly" message is new one to add to the mix..!
Contact Hubsan, they have a web site, and get help directly from the manufacture........!
Contact Hubsan, they have a web site, and get help directly from the manufacture........!
#3
New Member
Thread Starter
Join Date: Mar 2012
Posts: 17

There have been several reported video failures (among quite a few other issues) on the 502s reported at web sites like RCG, drone-maniac, fpv hub, droneflyers and a few more............The "circle fly" message is new one to add to the mix..!
Contact Hubsan, they have a web site, and get help directly from the manufacture........!
Contact Hubsan, they have a web site, and get help directly from the manufacture........!
I contacted their tech support and they sent the following info in case it can ever help anyone else:
up to 16GB Class 10 formatted to FAT32 . . .
http://www.wikihow.com/Format-FAT32 . . .
Hubsan LA Mon-Fri, 8:00AM-5:00 PM Pacific Time 909-444-055
Email: [email protected] / [email protected]
I hope they meant at least more than "up to" on the size because the one I ordered is 64GB I think...hopefully it can't be too big? Can it?
Thanks again!!!
David
Thread
Thread Starter
Forum
Replies
Last Post
_sOnGoKu_
New Product Announcements
3
06-25-2017 03:58 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)