Vintage and old timer models Discuss nostalgic vintage aircraft

Sterling Mambo 48" Electric Powered

Old 11-01-2018, 03:01 AM
  #1  
E-Challenged
Member
Thread Starter
 
E-Challenged's Avatar
 
Join Date: Aug 2005
Location: Southern CA
Posts: 556
Default Sterling Mambo 48" Electric Powered

I flew a full size Sterling Mambo with single channel rudder only system with rubber wound escapement and .23 glow power back in the 60's and had limited success with it, enough to become nostalgic and to want to build one with electric power.

I downloaded Mambo plans from Outerzone to a flashdrive and took it to a Fedex central office to have plan sheets printed full size. I obtained a Tobe Galloping Ghost actuator from Jay Mendoza in Mission Viejo, CA to give me flapping rudder and elevator. Elevators were added onto the lifting stab. I installed a Scorpion 450 size brushless motor and 3S 2200mah lipo . I added a 2 ounce fishing weight to the nose next to the motor. The model flew but the small Tobe GG actuator was not powerful enough and the model was barely controllable. I removed the GG actuator and installed two small servos to operate rudder and elevator. I grafted on balsa to increase area of the elevator.
The model now is very controllable and loves to crawl along in thermals. Model has translucent red wings and stab and yellow doped slab balsa fuselage and vertical tail. It has original Sterling wing logos made by Callie Graphics . The tail skid makes taxiing "interesting"
Attached Images
File Type: jpg
IMG_0015.JPG (185.7 KB, 95 views)
File Type: jpg
001.JPG (98.2 KB, 91 views)
File Type: jpg
IMG_0038.JPG (110.4 KB, 85 views)
E-Challenged is offline  
Old 11-01-2018, 05:35 AM
  #2  
Jack_Hammer
Veteran USAF
 
Jack_Hammer's Avatar
 
Join Date: Oct 2018
Posts: 53
Default

Did you print out the Mabo graphics on paper and cover with clear foil?
Jack_Hammer is offline  
Old 11-01-2018, 04:37 PM
  #3  
Stick Dude
Member
 
Stick Dude's Avatar
 
Join Date: Oct 2018
Location: Dfw Texas
Posts: 158
Default

I like that see through monokote, it offsets opaque pretty nicely, and you can see the construction of the airframe fully, really unique!
Stick Dude is offline  
Old 11-01-2018, 04:56 PM
  #4  
solentlife
Super Contributor
 
solentlife's Avatar
 
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 11,923
Default

Takes me back !! Super 60's and all that in UK.

Nostalgia is great but I can still remember some of the heartbreak when a model failed to fly well and crashed !

I have memorys of my older brother 'forcing me' me to be the runner to tow up his free-flight gliders !! Beautiful tissue covered jobs ... never did fly well though !

Pulse radio / GG and escarpments ............ what a joy when 2ch proportional hit the counters !!

Nigel
solentlife is online now  
Old 11-01-2018, 10:59 PM
  #5  
E-Challenged
Member
Thread Starter
 
E-Challenged's Avatar
 
Join Date: Aug 2005
Location: Southern CA
Posts: 556
Default

I downloaded the Sterling Mambo graphic logos and had Callie Graphics create the proper size logos to fit the wing. Callie is a lady who can make up almost any graphic you might need for a scale or sport model . She only needs some basic info and her prices are very reasonable. For example she made the Pepsi-Cola graphics for my Pat Tritle Stinson Reliant based on a 1937 Pepsi executive/PR aircraft. She made me a complete set of graphics for my Pat Tritle DC-3 in AA Flagship Detroit livery. Her graphics are stick-on vinyl, easy to apply.
Attached Images
File Type: jpg
IMG_0042.JPG (138.6 KB, 65 views)
E-Challenged is offline  
Old 11-02-2018, 12:18 AM
  #6  
Brner
AMA16634
 
Join Date: Dec 2008
Posts: 554
Default Memories....

Brings back memories....The Mambo was my first RC (sort-of) plane, back in 1956. It held a twin needle K&B .15 (one for high speed and one for low speed) Never did get that worked out. Hacked together a kit radio (Ace Commander) and, with a rubber wound Vari-comp ESC interrupted the Mambo's flight path often. Seems like centuries ago....Those were the days you had to work to get a plane in the air.....


Transmitter below is the one I built but rec and esc are more modern....LOL...
Attached Images
Brner is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
AEAJR
Beginners
165
06-28-2017 05:22 PM
AEAJR
General Electric Discussions
273
01-09-2017 03:23 AM
AEAJR
General Electric Discussions
54
11-02-2014 02:32 AM
Fon
Airplanes - Electric For Sale & WTB
2
07-17-2013 11:55 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Quick Reply: Sterling Mambo 48" Electric Powered


Contact Us Archive Advertising Cookie Policy Privacy Statement Terms of Service

Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.09115 seconds with 21 queries