Programming help please.
09-08-2020, 08:07 PM
#1
New Member
Thread Starter
Join Date: Sep 2020
Posts: 2
Programming help please.
Hiya folks, I'm coming back into flying, working with wings, since I can't see gliders at a distance anymore (getting older sucks). I'm currently overseas in Kuwait, and have picked up a JR T6x4. I'm rusty AF on programming, and can't get both elevon servos to work with aileron throws.
Oh, and for the REALLY old goats around here...I'm Twizter68...can't remember my password, and that email is no longer active.
Cheersw from Kuwait!
Bill
Oh, and for the REALLY old goats around here...I'm Twizter68...can't remember my password, and that email is no longer active.
Cheersw from Kuwait!
Bill
09-08-2020, 08:35 PM
#2
Community Moderator
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 6,907
Hey Bill, long time no see! Hope things are going well for you.
When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.
When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.
09-09-2020, 05:25 AM
#3
New Member
Thread Starter
Join Date: Sep 2020
Posts: 2
Originally Posted by crxmanpat
Hey Bill, long time no see! Hope things are going well for you.
When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.
When setting up the model in the radio, you should come across a setting asking for Wing Type. For a flying wing (or any delta wing plane), use the Delta setting. This will make the servos act as ailerons and elevators. I hope that's what you were asking.
Yeah I set up under the delta, but the left aileron still only works on elevator input.
Going to play with the mixes a bit.
09-09-2020, 06:11 AM
#4
Community Moderator
Join Date: Feb 2006
Location: Mesa, AZ
Posts: 6,907
So one thing I learned about delta and JR radios. You need to switch the servo plugs into the RX and/or reverse the switches in the radio. There was a combination that you had to get exactly right for everything to work properly. Been so long I've forgotten what it is. Try that first before messing with the mixes. Do the servo plugs first, then do the reverse switch.
Thread
Thread Starter
Forum
Replies
Last Post
jigeye
RC Radios, Transmitters, Receivers, Servos, gyros
9
12-23-2018 11:51 PM
mclarkson
Power Systems
15
06-14-2016 09:52 PM
flyinwalenda
Power Systems
6
09-24-2013 10:38 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
