Spektrum transmitter antenna question
#26
#29
#31
Community Moderator
Thread Starter
Join Date: Sep 2005
Location: Sevierville, Tennessee
Posts: 20,762

There is one screw that holds the antenna on to the top of the radio, remove it and pull the whole assembly straight out.
I looped the longer cable around the board at the top once to keep it from getting into the gimble area.
#32

http://www.horizonhobby.com/Products...rodId=EFLH1058 $9.99 plus shipping
Thanks thomdoe but Kev fixed me up. I appreciate the offer though.
#33

Hey! I recognize that look!



#34

I didn't mean to step on your toes. If you'll notice, our posts were <60 seconds apart, so while I was copy/pasting the link you were posting yours. $15 shipped for yours was very reasonable, I thought, but you only have one of them. I had just ordered two from horizon hobby myself.

#37

Here is the official answer from Horizons own documents. (DX7 TX/RX Module users manual)
4. Module User Requirements
4.2 Only a 2dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied Inpaq DAM00BM11500209 folded dipole
antenna.
4.2 Only a 2dBi antenna can be used with this module. The antenna must meet and not
exceed the gain and pattern of the supplied Inpaq DAM00BM11500209 folded dipole