WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - PSU 37.5V drops to 24.4V
View Single Post
Old 02-15-2016, 11:57 PM
  #14  
Gregor
Member
 
Join Date: Sep 2007
Posts: 65
Default

Originally Posted by 338federal View Post
I had the lowvolt limit at 18.1V. Manual says little lower than real output. Like mine 37.5V out. I put the lowerlimit to 36V. I think this was my problem.
Low supply limit should be 50%-75% of the supply voltage. If you set it at 36v, the chargers will start limiting as some as a the load causes the supply voltage to drop.

There are at a lot of users with that setup. It most certainly can me be made to work. As others have said, its most likely and issue with the way the supplies are wired together, or perhaps one of the supplies is going bad.
Gregor is offline  
 
Page generated in 0.02785 seconds with 7 queries