View Single Post
Old 04-15-2013, 06:36 AM
  #6  
fhhuber
Super Contributor
 
fhhuber's Avatar
 
Join Date: Mar 2013
Posts: 4,786
Default

You can skip the snap-ring and use a wheel collar with a flat ground on the shaft.

So if you can find "music wire" of the correct diameter... you can replace your outrunner shafts with any reasonable length you desire.

Find the dia and length shaft you need. You can make it work.
fhhuber is offline  
 
Page generated in 0.07536 seconds with 10 queries