Old 08-06-2007, 05:24 PM
  #2  
Joe Ford
Castle Creations Tech
 
Joe Ford's Avatar
 
Join Date: Jun 2006
Location: Olathe, Kansas
Posts: 115
Default

Sounds like there's something going on with the motor...do you have another ESC you could test with? If not, with timing at low and PWM at 13KHz on v1.55 does it do this? Have you extended any of the wires between the motor and ESC? Direct soldered or using connectors? Smaller prop help?
Joe Ford is offline  
 
Page generated in 0.07016 seconds with 10 queries