View Single Post
Old 01-09-2022, 04:21 PM
  #6  
quorneng
Super Contributor
 
quorneng's Avatar
 
Join Date: Jul 2008
Location: Cheshire, UK
Posts: 2,078
Default

Yes LW PLA is next on my to do list but I don't like the price.
I know due to its foaming i kg of LW PLA is supposed to create twice as much finished article but it is at least twice the price.

A bit more of the Hunter. The tail feathers
Click image for larger version

Name:	TailPlane1.JPG
Views:	6
Size:	194.6 KB
ID:	188699
Note a servo for each elevator half. Space limitation means the servos had to be mounted like ailerons.
The tail mounted on the fuselage and the top skin made good after a servo reverser was included in the fuselage for one of the servos.
Click image for larger version

Name:	TailPlane4.JPG
Views:	6
Size:	210.6 KB
ID:	188700
You have to do it like this when using a stab receiver otherwise the gyro stability correction for one elevator half would be the wrong way..


quorneng is offline  
 
Page generated in 0.05845 seconds with 9 queries