WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - BEC question
Thread: BEC question
View Single Post
Old 04-22-2011, 08:20 PM
  #6  
jap71173
BigWatts.shutterfly.com
 
jap71173's Avatar
 
Join Date: Feb 2011
Location: Hawaii
Posts: 382
Default

I'm also putting together a Multiplex Funjet... i'm learning to test out the electronics before installing them. I just pluged everything together an ran a 1/2 throttle test for 30 sec with no prop and my motor is getting hot... the esc and batt are cool, any ideas why?

This is what i'm using:
Motor: PKZ4216 1880Kv (it's the F27C Stryker stock motor)
ESC: 35 AMP
Battery: 3S 1000mAh 30C (same result on a 3300mAh 3S 20C)

P.S. When i add the prop, both the motor and the ESC are getting hot???

Last edited by jap71173; 04-22-2011 at 08:36 PM.
jap71173 is offline  
 
Page generated in 0.06194 seconds with 8 queries