View Single Post
Old 01-14-2021, 08:13 AM
  #2  
OwenB
Brushless motor guy
 
Join Date: Jan 2021
Location: Kawerau, Bay of Plenty, New Zealand
Posts: 5
Default

Here is a drawing for the three motor array. This is probably easier for me than trying to rewind a different motor.
It is intended for a 9x7 two blade.
However, despite being a glass composite material, it is also an E-only prop with hollow-cambered blades, and I
am not sure whether it is rated for 22,000 rpm.
Otherwise I have a 3-bladed 9x6 prop lined up. - it has left-hand and right-hand versions, for a twin-prop model plane.
I will sort out loading for a 9x7 two-blade, and then de-rate the motor spec to aim at 100 A max , 50 A per 3-motor array... that may be a problem,
as these ones are 38 A each!
they are also 445 w or so each, but 200w each is probably enough.
Performance parameters desired are 105 mph, 2000 gf static thrust per prop.
Attached Thumbnails Click image for larger version

Name:	Three motor array 2806-8 1800 KV 4S  14-1-21.jpg
Views:	50
Size:	768.0 KB
ID:	188337  

Last edited by OwenB; 01-14-2021 at 08:15 AM. Reason: Drawing.
OwenB is offline  
 
Page generated in 0.05682 seconds with 10 queries