WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - how exactly does the balancing in the FMA Cellpro PowerLab 8 charger work?
Old 04-15-2011, 03:12 AM
New Member
Join Date: Mar 2011
Posts: 15

Originally Posted by kyleservicetech View Post
I've been running my A123 cells at 30 Amp loads, discharging them to about 40% capacity in about 6 minutes. And after sitting in the hot sun, those cells actually cooled off after a flight. The cell temperature was measured with a Fluke 87V meter with its thermocouple temperature probe.
So let me understand this correctly - the cell temperature was lower after 6 minutes of 30Amp (how many C was that?) then before? Well, sitting in the sun, they might have had 40 degC or something. So in the plane there was share and they cooled down?
miernik is offline  
Page generated in 0.02978 seconds with 10 queries