WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - "5EZP" Grumman A-6 INTRUDER
View Single Post
Old 12-11-2019, 06:53 PM
Join Date: Oct 2019
Posts: 54
Default 5ezp a^ intruder new build

Originally Posted by Bobdaeronort View Post
I used a Grayson Hobby Micro-jet motor (2200kv w 6x4 prop) initially. I swapped it out for a GH MJv2 (92500kv) which improved the performance greatly.
I built a new one at 80% and used the Micr-Jet motor again.
The intruder makes a wonderfully stable flyer and a good ground skimmer.
Thanks for the information Mr. Daeronort. I'm torn between your F16 design and the intruder. If I'm successful with the intruder , I sure would like to tackle the F16. I have a GH micro jet V3 available, but it sounds like I better buy a GH MJV2 for the intruder.

Also, I wanted to thank you so much for the HO 229 plan and your advice. It's the fastest and best flying park jet my son and I have. I built it at 80% and put a GH Mega jet with a 6x5.5. prop in it. Wow does that thing scoot. The HO 229 has also made me and my son better pilots I think because of the aerobatic ability. Again, thanks for for your kindness and generiousity with your knowledge
ROCKETCHRIS is offline  
Page generated in 0.02832 seconds with 8 queries