WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Balsa USA 1/3 scale Cub--Which Motor?
View Single Post
Old 03-26-2009, 12:55 AM
  #9  
Greg Covey
Member
 
Greg Covey's Avatar
 
Join Date: Jul 2005
Location: Rochester, NY
Posts: 135
Default

Hi guys,

I stumbled across this thread so I thought I would set the record straight. The 7050 motor did not work for more than a single flight in my 1/3 scale clipped-wing cub. This was likely due to poor quality.

I ended up using the AXI 5345/16 motor and it continues to perform beautifully! You can read the details of the setup with photos at the end of my build thread link on RCU below.

http://www.rcuniverse.com/forum/m_61..._2/key_/tm.htm

Matt Kirsch also took some video of it at the 2008 NEAT Fair below.
http://videoserver.rcuniverse.com/rc...gcubfriday.wmv

Regards.

Greg Covey is offline  
 
Page generated in 0.05134 seconds with 11 queries