WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Free Flight to RC Conversion
View Single Post
Old 01-08-2020, 08:06 AM
  #5  
CHELLIE
Super Contributor
 
CHELLIE's Avatar
 
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,255
Default

Hi @foxch0844 Welcome to Wattflyers, I have been building CL, RC airplanes and Helis for over 50 years so I have a good idea what will work for you, here are some Power system parts for you that will work very very well. Hurry and order your parts, they may not be in Stock for very long, belive me on that one
Put your CG at 25% behind the front on the Leading Edge, thats a very very safe place to start from.

Motor 26X27 1200KV https://hobbyking.com/en_us/turnigy-...er-1200kv.html

esc https://hobbyking.com/en_us/turnigy-...ontroller.html

Battery https://hobbyking.com/en_us/turnigy-...lipo-pack.html

prop https://hobbyking.com/en_us/jxf-poly...-7x6-2pcs.html

servo - These are a great servo it all I use https://hobbyking.com/en_us/hxt900-m...-12sec-9g.html

Battery Charger -- this is a 12v powered charger, the 110v chargers seem to be out of stock, this charger is good enough for a 1300 MAH battery and less
and will allow you to charge your battery at the field https://hobbyking.com/en_us/turnigy-12v-2-3s-basic-balance-charger.

Last edited by CHELLIE; 01-08-2020 at 05:32 PM.
CHELLIE is offline  
 
Page generated in 0.02648 seconds with 8 queries