WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - 1/6 scale airco DH-2 scratchbuild
View Single Post
Old 09-04-2009, 04:04 PM
  #12  
DCflyer
Member
 
Join Date: Jul 2009
Posts: 37
Default airco 1/6 scale sratchbuild

thought i would post a couple more pis of the inner workings such as the rudder bar, servo deck and control stick. i could not find for the life of me any thing on the net as far as a close up of the control stick. i do know because of the placement of the horz. to the elevator horns and from what pics i do have that the stick has to pivoy left to right and a solid placement foward and reverse to control the elev.. so i got left to right covered for the alierons but how do i get elev. movment with out affecting the alieron shaft and keep it from going up and down. i'm not sure if this is the way they did it in 1916 but it works and works well and as i see it there arn't to many ways to do this plus at 1/6 scale you don't have alot of room for a cockpit that works so i built a minature universal so to speak. so i hand cut all the parts and silver soldered every thing together and it works just fine, you'll see when you look at the pics.
Attached Thumbnails Click image for larger version

Name:	17.jpg
Views:	926
Size:	56.5 KB
ID:	108543   Click image for larger version

Name:	18.jpg
Views:	991
Size:	56.5 KB
ID:	108544   Click image for larger version

Name:	19.jpg
Views:	849
Size:	35.5 KB
ID:	108545   Click image for larger version

Name:	20.jpg
Views:	812
Size:	41.8 KB
ID:	108546   Click image for larger version

Name:	21.jpg
Views:	827
Size:	52.3 KB
ID:	108547  

Click image for larger version

Name:	22.jpg
Views:	1070
Size:	63.1 KB
ID:	108548   Click image for larger version

Name:	23.jpg
Views:	2079
Size:	67.5 KB
ID:	108549   Click image for larger version

Name:	24.jpg
Views:	1235
Size:	66.4 KB
ID:	108550  
DCflyer is offline  
 
Page generated in 0.03307 seconds with 17 queries