WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - Scratch built WW-1 plane
View Single Post
Old 03-28-2007, 05:19 PM
Tucson Don
Tucson Don
Tucson Don's Avatar
Join Date: Jan 2006
Location: Tucson, AZ where conditions are great for model flying
Posts: 108
Default Scratch built WW-1 plane

Find some 3-vew drawings and sketch a full size plan for cutting out Dow
blue foam parts. Bend to shape and glue with hot glue. Use skewers for
struts and GWS skinny wheels covered with thin foam discs. Save weight
at every opportunity. Fly with small outrunner and two cell lipo. With
short nose, like Nieuport, put battery directly beneath motor., This beats
high cost and is real fun !
Tucson Don is offline  
Page generated in 0.02762 seconds with 9 queries