View Single Post
Old 02-21-2009, 11:22 PM   #1
Flyboone
twitter.com/flyboone
 
Flyboone's Avatar
 
Join Date: Jan 2009
Location: Nashville
Posts: 75
iTrader: (0)
Friends: (1)
Default Eurofighter Tiger Jet



Eurofighter Tiger Edition RTF Jet
Eurofighter Tiger Edition ARF Jet


29-1/8" wingspan, 42" long, 350 sq. in. wing area, 30 oz. flying weight. This colorful pre-painted jet has all the main assemblies pre-built. Assembly to flight ready status takes only an hour or two. Two 64mm fans driven by two Outrunner brushless motors power jet. The two speed controls are 25 amps each and are pre-wired and installed, ready to plug into the supplied 2200 mAh 3-cell lipo battery. Battery access is under the canopy. Canopy is held in place by magnets, as is the upper section behind the canopy, providing access to the speed controls. Fans and motors can be accessed through a removable panel on the bottom of the fuselage. ARF version is ready for you to install your 4 channel receiver (delta mixing required). A balance charger for the lithium battery is included. The 3 servos are pre-installed and all control surfaces are pre-hinged with the control horns installed. Jet can be flown with the included landing gear and steerable nose wheel, or the gear can be quickly removed for hand launching and belly landing. Flight times are in excess of 5 minutes. The twin fans provide lots of thrust for strong climbs and a high top speed. Rolls, loops and inverted flight are a breeze and the delta wing really slows down well for soft, slow landings. Photo illustrated building instructions with CG location clearly marked will get you from the box and into the air quickly.

For more information click HERE

Use this thread to discuss any and all things related to Eurofighter Tiger Jet
Flyboone is offline  
  Reply With Quote
 
Page generated in 0.05495 seconds with 7 queries