View Single Post
Old 02-03-2021, 03:24 PM
  #4  
solentlife
Super Contributor
 
solentlife's Avatar
 
Join Date: Oct 2010
Location: Ex UK Brit now in Latvia west coast - Ventspils
Posts: 12,789
Default

Don's got it .....

Turnigy ESC's can default out if it thinks throttle is not fully down ... so not unusual to put throttle stick to min and trim to lowest as well. Do the throttle calibration with trim down ... once done - you can put trim back to mid ...

Another one is check that Throttle Trim is not activated as a Wet Fuel motor setup where it has movement at idle - but nothing in higher positions.
solentlife is offline  
 
Page generated in 0.06144 seconds with 8 queries