View Single Post
Old 10-15-2014, 12:03 AM
Super Contributor
CHELLIE's Avatar
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,264

Its getting there Looking good Bob, Try building with white depron 6 mm and 9 mm Foam, the blue cor foam is Ok, but the Depron is much stiffer, and will give you a super nice build, the blue cor foam tends to wafer when building, where the depron stays nice and Flat. try using 5 and 30 min epoxy too, I buy epoxy from Harbor freight tools, it works great and does not turn yellow. Before I Forget Wipe the Depron with Rubbing alcohol, that will remove the release agent that is used when making the foam, and tape and paint will stick better to the foam.

Last edited by CHELLIE; 10-15-2014 at 12:23 AM.
CHELLIE is offline  
Page generated in 0.06781 seconds with 10 queries