WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - How Do I Mount My Outrunner Motor ?
View Single Post
Old 05-21-2009, 06:24 AM
Super Contributor
CHELLIE's Avatar
Join Date: Oct 2006
Location: Hesperia, So. Calif
Posts: 19,246

Originally Posted by Neogenesis View Post
There is one option I haven't seen here yet. How to mount a 50-65 270kv outrunner to a profile. Specifically I'm working on converting a OMP 67" Fusion. I've had to cut the old hardwood glow rails out to make room for the outrunner, and at this point am thinking of basically fitting a firewall in to mount the motor to. Using some triangle stock to reinforce and some angle aluminum to make sure it doesn't go anywhere. Anyone one else ever converted a profile?


Maybe this might help, epoxy the sides to the foam, with some spacers in the foam to prevent crushing of the foam, and bolt it on, use epoxy to glue the 1/4" plywood together, hope that helps, Take care, Chellie

Attached Thumbnails Click image for larger version

Name:	motor mount.jpg
Views:	3950
Size:	37.5 KB
ID:	101520  
CHELLIE is offline  
Page generated in 0.04360 seconds with 13 queries