WattFlyer RC Electric Flight Forums - Discuss radio control eflight - View Single Post - New firmware v2.29 released for Cellpro 10s Charger
Old 09-22-2010, 02:10 AM
  #1  
Tim Marks
President FMA, Inc.
 
Join Date: Dec 2009
Posts: 112
Default New firmware v2.29 released for Cellpro 10s Charger

Hi:

Today FMA Direct published new firmware version 2.29 for the Cellpro 10s charger to the general public. We highly recommend that all existing 10s customers update to the latest version which addresses certain false Safety Codes, and generally improves the overall reliability of the charger.

The update is accessible via the free Cellpro 10s Charge Control Software available at the following download. Interfacing the charger to your Windows-based PC requires either the FUIM2 or the FUIM3 USB PC interface as well.

Here is the link to the CCS:

http://www.revolectrix.com/new_appli..._software.html

Here is the link to the FUIM3 USB PC interface on the REVO Store:

http://www.store.revolectrix.com/Pro...ro-10s_2/FUIM3

The FUIM3 is also stocked in our Maryland facility and qualifies as a small item we can ship via US Mail for $3 shipping cost. Please call (800) 343-2934 to order via FMA Direct.

After installing the software and the USB driver (follow the instructions on the software install pages), follow these steps to update your charger's firmware:

1) Click on the Firmware tab of the CCS
2) Click on "Click to install V2.29 firmware"
3) Click "Update Firmware"


Tim Marks
Tim Marks is offline  
 
Page generated in 0.02805 seconds with 9 queries