WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   WWI Era (https://www.wattflyer.com/forums/forumdisplay.php?f=70)
-   -   WWI planes (https://www.wattflyer.com/forums/showthread.php?t=259)

scalercflyer 02-27-2010 02:08 AM

At attention
 
If I could put you Guys in a room, I'd make all of you line up and stand at attention. :) Then I'd go down the line and crack each one of you, one at a time ! :eek: Leave it to you Guys to twist me up again about red airplanes, just when my therapy was going so well! :eek::rolleyes: :D. You'd think you Guys would have learned by now.............. :mad: :censor: Marty

dbcisco 02-27-2010 02:39 AM

Lead poisoning:
"The classic signs and symptoms in children are loss of appetite, abdominal pain, vomiting, weight loss, constipation, anemia, kidney failure, irritability, lethargy, learning disabilities, and behavior problems.[15] Children may also experience hearing loss, delayed growth, drowsiness, clumsiness, or loss of new abilities, especially speech skills.[12] Symptoms may appear in children at lower blood lead levels than in adults.[16]"

dbcisco 02-27-2010 02:41 AM


Originally Posted by scalercflyer (Post 696591)
...just when my therapy was going so well! ...

I get a kickback from your shrink. :D:D:D

Biplane Murphy 02-27-2010 03:40 AM


Originally Posted by dbcisco (Post 696601)
I get a kickback from your shrink. :D:D:D

That was a good one!!

LOL

:)

degreen60 02-27-2010 11:54 AM


Originally Posted by dbcisco (Post 696601)
I get a kickback from your shrink. :D:D:D

The kickbacks are WW1 R/C planes. The shrink is building up his cliental by feeding our habit.

degreen60 02-27-2010 12:00 PM

I found the movie Von Richthofen on EDRAM. I don't know how good the movie is. It is rated 2.5 stars. I have my recorder set 205 AM EST March 4th.

dbcisco 02-27-2010 04:16 PM

A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

WWI Ace 02-27-2010 04:24 PM

Will short kits be made available for the Razor Marty? Steve

degreen60 02-27-2010 10:51 PM


Originally Posted by dbcisco (Post 696698)
A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

A red foam DR1

WWI Ace 02-28-2010 12:44 AM

I can't hate the color red. That's what color my hair is!!!! LOL!! Steve

dbcisco 02-28-2010 02:51 AM

Did you know white glue is made with milk?
CA glue has cyanide in it.

Ron 02-28-2010 10:14 AM

Oh I notice Marty's plane is a "razor"..when he mentioned shaving, I thought about shaving foam, so I figured it would be a "foamie"

degreen60 02-28-2010 12:33 PM


Originally Posted by Ron (Post 696946)
Oh I notice Marty's plane is a "razor"..when he mentioned shaving, I thought about shaving foam, so I figured it would be a "foamie"

May your wings
take to flight
and the touch
down be
very light
Burma-Shave

K CLOSE 03-01-2010 03:38 AM

6 Attachment(s)
I finally got the pics off my phone, so I wanted to post the pic's I took of Patrick's (RyanFlyer) flat foam build. I think this is the thread he was posting in. Anyway, here they are-PS she flew great!

degreen60 03-01-2010 09:43 AM


Originally Posted by K CLOSE (Post 697187)
I finally got the pics off my phone, so I wanted to post the pic's I took of Patrick's (RyanFlyer) flat foam build. I think this is the thread he was posting in. Anyway, here they are-PS she flew great!

I like it. Looks like it could use a set of skis. HAHA

Ryan Flyer 03-04-2010 08:56 PM

Just Finished building my foam triplane! I windy to maiden it now but I will post when I do.

Patrick

PS Marty, It is GREEN not RED :)

dbcisco 03-04-2010 10:05 PM


Originally Posted by dbcisco (Post 696698)
A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

Next clue: I am really laboring over this one.

Not sure if it should be white or silver, depends on how much coverlite I have of each. At least it won't be red. ;-) I'll post picks in a new thread when someone guess what it is.

degreen60 03-07-2010 12:04 AM

1 Attachment(s)
Look what Eflite has now to go with the Nieuport and SE5A. Marty should love it.

dbcisco 03-07-2010 12:12 AM

Pretty neat at "Selling Price 69.99". Better cosmetics than my SIG D7.

WWI Ace 03-07-2010 03:06 AM

What color is that Marty? Purple? LOL!!!! Steve

IndyJones 03-07-2010 05:41 AM


Originally Posted by degreen60 (Post 698966)
Look what Eflite has now to go with the Nieuport and SE5A. Marty should love it.

The bad thing is that it has non-scale wing "wires". :<:
But I'll probably get one anyway... ;-)

dbcisco 03-07-2010 06:16 AM


Originally Posted by IndyJones (Post 699073)
The bad thing is that it has non-scale wing "wires". :<:
But I'll probably get one anyway... ;-)

Put CF reinforcement in wings like the SIG and snip the wires.

degreen60 03-07-2010 03:01 PM

A CF rod across the wings will flatten and hold them in place without the wires. I wonder if it will fly good with the wings flat or will you need to cut the CF rod and put a bend in the middle. My Nieuports fly good with the top wing almost flat. I only have a half inch of dihedral in the top wing. I haven't tried a flat wing but it seems like the Nieuport would fly with the top wing flat.

dbcisco 03-07-2010 03:46 PM

On the SIG bipes, the dihedral is created in the air by the weight of the plane acting on the CFed wings. Do not put the CF as a single piece from wingtip to wingtip. Put a section in each side.

scalercflyer 03-07-2010 04:12 PM

DVII
 
You Guys are killing me! :eek: Yes, I like the plane. :rolleyes: I, however, still hold to the fact that the kit manufactuers (they have no imagination obviously) think everyone should have a RED airplane. :rolleyes: If they produced this plane with a couple of different color schemes, they could double their sales! :eek: As a matter of fact, they need to consult us experts here at Wattflyer as to potential camo schemes. :eek::D;) I think it's only fair! :D BTW, DB, are you going to the Lebanon flea market this weekend? Maybe we could meet there. PM me if you're going and we'll work out the details. Marty

scalercflyer 03-07-2010 04:15 PM

DVII
 
Yeah I'l probably get one too! Choke.....gag....choke, choke...........gagggggggggggg:eek::D:rolleyes:

degreen60 03-07-2010 09:16 PM

Most of the time I want to change the color of any RTF I get. But I do like the candy strips on the DVII. Maybe we should all chip in and send one to Marty. It maybe just the cure for him. LOL

Ryan Flyer 03-08-2010 08:28 PM

I have finished and flown my foam triplane! It is really cool looking it the air.
I see if K can post some pics of it some time.
Pat

dbcisco 03-13-2010 06:12 AM

1 Attachment(s)
I am laboring on this one. Should have used milk (Elmers) glue. Going to be nursing this one along. Here's a pic of the build so far.

Ryan Flyer 03-13-2010 09:11 PM

Nice build!

79CJ 03-13-2010 10:21 PM


Originally Posted by dbcisco (Post 700866)
I am laboring on this one. Should have used milk (Elmers) glue. Going to be nursing this one along. Here's a pic of the build so far.

Looks like a kit, what kit is it? Guillows 24"? Anyway, looking good.

WWI Ace 03-14-2010 12:35 AM

Can't wait to see it!!! Steve

dbcisco 03-14-2010 01:46 AM


Originally Posted by 79CJ (Post 701036)
Looks like a kit, what kit is it? Guillows 24"? Anyway, looking good.

Good eyes! It is a Guillows 24" kit. I bought a "used kit" with the plans and less than half the die-cut sheets.
Care to guess what model it is?

degreen60 03-14-2010 03:13 AM


Originally Posted by dbcisco (Post 701088)
Good eyes! It is a Guillows 24" kit. I bought a "used kit" with the plans and less than half the die-cut sheets.
Care to guess what model it is?


Nieuport 11

dbcisco 03-14-2010 03:31 AM


Originally Posted by degreen60 (Post 701099)
Nieuport 11

Thats it! I'm having a Bebe!
Laboring over it, nursing it along, milk glue.

I tried some Chinese made covering but it melts before it even starts to shrink. Have to get some coverlite for it.

scalercflyer 03-14-2010 06:37 AM

N11
 
Sorry I missed you at the flea market today D :sad:. Anyway, I have this kit (got it off of ebay for $16.00! :eek::D). Mine is a lazer cut kit (notice the gold circle on the box. It says lazer cut kit. That's how you tell) :cool:. I think I might make it be a foul weather build (no flying, shop time). Yeah shop time :cool:.......... nothing like it. No witches to bother you, no phone, etc,.............. You gotta love it! :eek::D:rolleyes::cool: Marty

http://i.ebayimg.com/07/!BfIiwN!!2k~...2dRj!~~_12.JPG

dbcisco 03-14-2010 07:04 AM

The laser cut Guillows kits are nice.You got a good deal!
I like the heavier wood in guillows kits although some folks hate it. I used some FF contest grade balsa in my N.11 and I hated it, to soft and bendy for film covering (IMHO).

I didn't see much at the show that was my to taste.
I only bought some covering for my N.11 and a used peak charger.
Much of the stuff was more expensive than I can get at the LHS or ebay.
I liked the Bucks County swap-meet (4/16/2010) better.

For the cost of gas I used I could have stayed home and bought a kit at the LHS.:sad: I won a couple old Comet kits (20-24 WS) on ebay before I left so that was nice.

MOdesigner 03-16-2010 03:25 AM

Micro DH2
 
1/25 scale DH2 by MikeandSonModels :)
http://i56.photobucket.com/albums/g1.../DH2final2.jpg

[media]http://vimeo.com/9987773[/media]

Ryan Flyer 03-16-2010 06:01 PM

Is that a flying model?

Biplane Murphy 03-16-2010 08:43 PM


Originally Posted by Ryan Flyer (Post 701750)
Is that a flying model?

Check out his untitled vimeo video!!

Looks like a great flyer, and indoors too!!!


All times are GMT +1. The time now is 02:34 PM.

Powered by: vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright © 2022 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.12163 seconds with 7 queries