WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   RC Radios, Transmitters, Receivers, Servos, gyros (https://www.wattflyer.com/forums/forumdisplay.php?f=68)
-   -   Need a servo same size as the old JR MN48 mini (https://www.wattflyer.com/forums/showthread.php?t=80115)

firemanbill 06-19-2019 04:47 PM

Need a servo same size as the old JR MN48 mini
 
This servo has been discontinued long ago and I need one this size. it is in between a mini and full size. Was really an odd servo. E-flite used them in a lot of their stuff and I picked up a Diamante a couple months ago that needs them in the wing.

If anyone has 4 they could let go of or any idea of another one this size that would be awesome.

they are
length 1.3" or 33mm
width 0.58" or 14.7mm
Height 1.02" or 25.9mm

So far nothing I have found comes close to this size.

Thanks in advance

firemanbill 06-25-2019 02:08 PM

So no one has any ideas about servos? That's a bummer

solentlife 06-25-2019 05:54 PM

Hobby King / RC Timer / Banggood give dimensions of the servos and I have found them to be accurate.

TBH - rarely do I find servos that fit factory slots and often I end up adding ply plate to match servo. Modern servos have increased power / speed but shrunk in size compared to the old days ... so using a modern servo of similar size is often a lot more powerful etc.

firemanbill 06-25-2019 08:00 PM

I have considered doing that but the wing of this plane is so thin it needs the shallow servo to fit in the pocket and it is not hidden so adding ply frame it up to fit something else may look less than stellar. the rudder and elevator are not as big of an issue as they have more access room to use different types

I'll stay on the hunt looking for a pair of those dimensions.

Thanks

solentlife 06-25-2019 09:05 PM

What about the ultra thin servos designed for thin wings ?

firemanbill 06-25-2019 09:35 PM

So far the only ones I can find are full size and too big. This was a thin mini servo. not full size but not micro either. Really an odd size, it's no wonder they quit making them

MustangMan 06-26-2019 07:57 PM

Would this work? https://hobbyking.com/en_us/corona-d...15sec-22g.html

I realize it's a little larger in one dimension, but slightly smaller in the other two, including being thinner. Can you make room?

gyrocptr 06-27-2019 06:02 AM

https://www.headsuphobby.com/Power-U...vo_p_1894.html

Power Up 12g Metal Gear Servo Specifications:
Operating Voltage: 4.8~6.0V
Operating Speed (4.8V): 0.12sec/60
Operating Speed (6V): 0.10 sec/60
Stall Torque (4.8V): 30.8 oz /in (2.2 kg/cm)Stall Torque (6V): 35.0 oz/in (2.5 kg/cm)
Dimensions: 0.92 x 0.48 x 0.98 inches (23.2 x 12.0 x 24.8 mm)
Weight: 0.38 ounces (10.8 grams)
Connector Wire Length: 6.5 in. (165 mm.)
Universal "S" connector

firemanbill 06-27-2019 02:21 PM


Originally Posted by gyrocptr (Post 1019465)
https://www.headsuphobby.com/Power-U...vo_p_1894.html

Power Up 12g Metal Gear Servo Specifications:
Operating Voltage: 4.8~6.0V
Operating Speed (4.8V): 0.12sec/60
Operating Speed (6V): 0.10 sec/60
Stall Torque (4.8V): 30.8 oz /in (2.2 kg/cm)Stall Torque (6V): 35.0 oz/in (2.5 kg/cm)
Dimensions: 0.92 x 0.48 x 0.98 inches (23.2 x 12.0 x 24.8 mm)
Weight: 0.38 ounces (10.8 grams)
Connector Wire Length: 6.5 in. (165 mm.)
Universal "S" connector

That one is too small to fit the opening without adding additional framing. I actually have some of them.

solentlife 06-27-2019 04:46 PM

Here's HK selection that gets as close as possible to the eFlites ..

https://hobbyking.com/en_us/radio-se...0%5D=25&is_v=1

Banggood pages :

https://www.banggood.com/Wholesale-R....html?from=nav

BlumKram 08-22-2019 08:58 AM

You can check HK selections on hobbyking.com , I remember there were good options to choose from.

firemanbill 08-22-2019 03:21 PM

thanks all, I did manage to find a couple from a friend.


All times are GMT +1. The time now is 11:35 PM.

Powered by: vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2018 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.03440 seconds with 9 queries