WattFlyer RC Electric Flight Forums - Discuss radio control eflight

WattFlyer RC Electric Flight Forums - Discuss radio control eflight (https://www.wattflyer.com/forums/index.php)
-   WWI Era (https://www.wattflyer.com/forums/forumdisplay.php?f=70)
-   -   WWI planes (https://www.wattflyer.com/forums/showthread.php?t=259)

scalercflyer 02-27-2010 01:08 AM

At attention
 
If I could put you Guys in a room, I'd make all of you line up and stand at attention. :) Then I'd go down the line and crack each one of you, one at a time ! :eek: Leave it to you Guys to twist me up again about red airplanes, just when my therapy was going so well! :eek::rolleyes: :D. You'd think you Guys would have learned by now.............. :mad: :censor: Marty

dbcisco 02-27-2010 01:39 AM

Lead poisoning:
"The classic signs and symptoms in children are loss of appetite, abdominal pain, vomiting, weight loss, constipation, anemia, kidney failure, irritability, lethargy, learning disabilities, and behavior problems.[15] Children may also experience hearing loss, delayed growth, drowsiness, clumsiness, or loss of new abilities, especially speech skills.[12] Symptoms may appear in children at lower blood lead levels than in adults.[16]"

dbcisco 02-27-2010 01:41 AM


Originally Posted by scalercflyer (Post 696591)
...just when my therapy was going so well! ...

I get a kickback from your shrink. :D:D:D

Biplane Murphy 02-27-2010 02:40 AM


Originally Posted by dbcisco (Post 696601)
I get a kickback from your shrink. :D:D:D

That was a good one!!

LOL

:)

degreen60 02-27-2010 10:54 AM


Originally Posted by dbcisco (Post 696601)
I get a kickback from your shrink. :D:D:D

The kickbacks are WW1 R/C planes. The shrink is building up his cliental by feeding our habit.

degreen60 02-27-2010 11:00 AM

I found the movie Von Richthofen on EDRAM. I don't know how good the movie is. It is rated 2.5 stars. I have my recorder set 205 AM EST March 4th.

dbcisco 02-27-2010 03:16 PM

A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

WWI Ace 02-27-2010 03:24 PM

Will short kits be made available for the Razor Marty? Steve

degreen60 02-27-2010 09:51 PM


Originally Posted by dbcisco (Post 696698)
A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

A red foam DR1

WWI Ace 02-27-2010 11:44 PM

I can't hate the color red. That's what color my hair is!!!! LOL!! Steve

dbcisco 02-28-2010 01:51 AM

Did you know white glue is made with milk?
CA glue has cyanide in it.

Ron 02-28-2010 09:14 AM

Oh I notice Marty's plane is a "razor"..when he mentioned shaving, I thought about shaving foam, so I figured it would be a "foamie"

degreen60 02-28-2010 11:33 AM


Originally Posted by Ron (Post 696946)
Oh I notice Marty's plane is a "razor"..when he mentioned shaving, I thought about shaving foam, so I figured it would be a "foamie"

May your wings
take to flight
and the touch
down be
very light
Burma-Shave

K CLOSE 03-01-2010 02:38 AM

6 Attachment(s)
I finally got the pics off my phone, so I wanted to post the pic's I took of Patrick's (RyanFlyer) flat foam build. I think this is the thread he was posting in. Anyway, here they are-PS she flew great!

degreen60 03-01-2010 08:43 AM


Originally Posted by K CLOSE (Post 697187)
I finally got the pics off my phone, so I wanted to post the pic's I took of Patrick's (RyanFlyer) flat foam build. I think this is the thread he was posting in. Anyway, here they are-PS she flew great!

I like it. Looks like it could use a set of skis. HAHA

Ryan Flyer 03-04-2010 07:56 PM

Just Finished building my foam triplane! I windy to maiden it now but I will post when I do.

Patrick

PS Marty, It is GREEN not RED :)

dbcisco 03-04-2010 09:05 PM


Originally Posted by dbcisco (Post 696698)
A "kickback" is on the building table now. Guess what it is.
Here's a clue: I should have used white glue when building it.

Next clue: I am really laboring over this one.

Not sure if it should be white or silver, depends on how much coverlite I have of each. At least it won't be red. ;-) I'll post picks in a new thread when someone guess what it is.

degreen60 03-06-2010 11:04 PM

1 Attachment(s)
Look what Eflite has now to go with the Nieuport and SE5A. Marty should love it.

dbcisco 03-06-2010 11:12 PM

Pretty neat at "Selling Price 69.99". Better cosmetics than my SIG D7.

WWI Ace 03-07-2010 02:06 AM

What color is that Marty? Purple? LOL!!!! Steve

IndyJones 03-07-2010 04:41 AM


Originally Posted by degreen60 (Post 698966)
Look what Eflite has now to go with the Nieuport and SE5A. Marty should love it.

The bad thing is that it has non-scale wing "wires". :<:
But I'll probably get one anyway... ;-)

dbcisco 03-07-2010 05:16 AM


Originally Posted by IndyJones (Post 699073)
The bad thing is that it has non-scale wing "wires". :<:
But I'll probably get one anyway... ;-)

Put CF reinforcement in wings like the SIG and snip the wires.

degreen60 03-07-2010 02:01 PM

A CF rod across the wings will flatten and hold them in place without the wires. I wonder if it will fly good with the wings flat or will you need to cut the CF rod and put a bend in the middle. My Nieuports fly good with the top wing almost flat. I only have a half inch of dihedral in the top wing. I haven't tried a flat wing but it seems like the Nieuport would fly with the top wing flat.

dbcisco 03-07-2010 02:46 PM

On the SIG bipes, the dihedral is created in the air by the weight of the plane acting on the CFed wings. Do not put the CF as a single piece from wingtip to wingtip. Put a section in each side.

scalercflyer 03-07-2010 03:12 PM

DVII
 
You Guys are killing me! :eek: Yes, I like the plane. :rolleyes: I, however, still hold to the fact that the kit manufactuers (they have no imagination obviously) think everyone should have a RED airplane. :rolleyes: If they produced this plane with a couple of different color schemes, they could double their sales! :eek: As a matter of fact, they need to consult us experts here at Wattflyer as to potential camo schemes. :eek::D;) I think it's only fair! :D BTW, DB, are you going to the Lebanon flea market this weekend? Maybe we could meet there. PM me if you're going and we'll work out the details. Marty

scalercflyer 03-07-2010 03:15 PM

DVII
 
Yeah I'l probably get one too! Choke.....gag....choke, choke...........gagggggggggggg:eek::D:rolleyes:

degreen60 03-07-2010 08:16 PM

Most of the time I want to change the color of any RTF I get. But I do like the candy strips on the DVII. Maybe we should all chip in and send one to Marty. It maybe just the cure for him. LOL

Ryan Flyer 03-08-2010 07:28 PM

I have finished and flown my foam triplane! It is really cool looking it the air.
I see if K can post some pics of it some time.
Pat

dbcisco 03-13-2010 05:12 AM

1 Attachment(s)
I am laboring on this one. Should have used milk (Elmers) glue. Going to be nursing this one along. Here's a pic of the build so far.

Ryan Flyer 03-13-2010 08:11 PM

Nice build!

79CJ 03-13-2010 09:21 PM


Originally Posted by dbcisco (Post 700866)
I am laboring on this one. Should have used milk (Elmers) glue. Going to be nursing this one along. Here's a pic of the build so far.

Looks like a kit, what kit is it? Guillows 24"? Anyway, looking good.

WWI Ace 03-13-2010 11:35 PM

Can't wait to see it!!! Steve

dbcisco 03-14-2010 12:46 AM


Originally Posted by 79CJ (Post 701036)
Looks like a kit, what kit is it? Guillows 24"? Anyway, looking good.

Good eyes! It is a Guillows 24" kit. I bought a "used kit" with the plans and less than half the die-cut sheets.
Care to guess what model it is?

degreen60 03-14-2010 01:13 AM


Originally Posted by dbcisco (Post 701088)
Good eyes! It is a Guillows 24" kit. I bought a "used kit" with the plans and less than half the die-cut sheets.
Care to guess what model it is?


Nieuport 11

dbcisco 03-14-2010 01:31 AM


Originally Posted by degreen60 (Post 701099)
Nieuport 11

Thats it! I'm having a Bebe!
Laboring over it, nursing it along, milk glue.

I tried some Chinese made covering but it melts before it even starts to shrink. Have to get some coverlite for it.

scalercflyer 03-14-2010 05:37 AM

N11
 
Sorry I missed you at the flea market today D :sad:. Anyway, I have this kit (got it off of ebay for $16.00! :eek::D). Mine is a lazer cut kit (notice the gold circle on the box. It says lazer cut kit. That's how you tell) :cool:. I think I might make it be a foul weather build (no flying, shop time). Yeah shop time :cool:.......... nothing like it. No witches to bother you, no phone, etc,.............. You gotta love it! :eek::D:rolleyes::cool: Marty

http://i.ebayimg.com/07/!BfIiwN!!2k~...2dRj!~~_12.JPG

dbcisco 03-14-2010 06:04 AM

The laser cut Guillows kits are nice.You got a good deal!
I like the heavier wood in guillows kits although some folks hate it. I used some FF contest grade balsa in my N.11 and I hated it, to soft and bendy for film covering (IMHO).

I didn't see much at the show that was my to taste.
I only bought some covering for my N.11 and a used peak charger.
Much of the stuff was more expensive than I can get at the LHS or ebay.
I liked the Bucks County swap-meet (4/16/2010) better.

For the cost of gas I used I could have stayed home and bought a kit at the LHS.:sad: I won a couple old Comet kits (20-24 WS) on ebay before I left so that was nice.

MOdesigner 03-16-2010 02:25 AM

Micro DH2
 
1/25 scale DH2 by MikeandSonModels :)
http://i56.photobucket.com/albums/g1.../DH2final2.jpg

[media]http://vimeo.com/9987773[/media]

Ryan Flyer 03-16-2010 05:01 PM

Is that a flying model?

Biplane Murphy 03-16-2010 07:43 PM


Originally Posted by Ryan Flyer (Post 701750)
Is that a flying model?

Check out his untitled vimeo video!!

Looks like a great flyer, and indoors too!!!


All times are GMT +1. The time now is 06:02 PM.

Powered by: vBulletin
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
Copyright 2021 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.

Page generated in 0.14542 seconds with 9 queries